Return to site

7 Steps to Fix Brother Printer Unable to Print Fuser Error 76

· Fuser Error 76,Unable to Print,Brother Error,Unable to print 76

Are you facing Brother Printer Unable to print 76 error?

If yes then in this post we have mentioned its causes as well a required sequential step to overcome from this error.

Or for instant help, you call Brother Printer Customer Support Number 1-800-862-1908.

To fix Brother Printer Unable to Print 76 this error code is associated with centre thermistor measuring a rapid rise in temperature failure.

Causes of Brother Printer Unable to print 76 Error

• Incomplete installation of printer software

• Inappropriate deletion of programs.

• System virus or adware/spyware attack

• Improper shut down from the system or laptop.

• Corruption of the entries inside the home windows process files.

Brother Printer Support Number

Required Sequential Steps to fix Brother Printer Unable to Print 76:

Step 1: Properly turn of the device.

Step 2: Now switch on the Printer while holding down to the “menu” button until all the led are flashing On/Off. Now you are in “maintenance” mode.

Step 3: Carefully Press 80

Step 4: After executing the above steps now you tap on the “mono start” button sometimes until you see for removal: xxxx

Step 5: To reset the purge counter Press “2783” in a specific order. You will see removal: 0000

Step 6: tap on the “stop” button.

Step 7: To exit the maintenance mode Press “99” carefully.

In case the issue still exists after going through the blog steps. Then you can get connected to Brother Printer customer support phone number team to fix Printing machine problem by Qualified Brother Printer technical expert.

Source Url-http://customer-support-numbers.dudaone.com/7-steps-to-fix-brother-printer-unable-to-print-fuser-error-76